Ethernet,IP入门动手实验手册(Eglish)

Lab 4: Using RSView ME and PanelView Plus 600

About This Lab This lab will provide a demonstration of EtherNet/IP communications to a PanelView Plus 600. The programs for the PanelView Plus 600 and the ControlLogix processor have already been

constructed. The ControlLogix program was created using RSLogix 5000. The PanelView Plus 600 program was created using RSView Studio. We will use a PanelView Plus 600 Touch screen.

Downloading to the 5563 Processor 1. From the RSLogix 5000 toolbar menu, select File > Open. 2. Open the program named EIP_DEMO_PVP.ACD.

3. Download this program to the L63 processor in slot 3 of the upper chassis of your lab station

(IP address 192.168.1.2) and go into Remote Run mode. 4. From the toolbar menu, select Communications > Go Offline. 5. From the toolbar menu, select File > Exit.

Opening the Existing RSView ME Project 1. From the computer desktop, double-click on the RSView Studio icon .

2. Select and click on Continue.

3. When the following list appears, select the EIP_DM application as shown below and then click

Open.

NOT-SP003E-EN-E

3/27/2013 Page 37 of 98

This will launch the development environment for RSView Studio as shown below:

.

Reviewing the HMI Communications Path An application display screen has already been created for this lab. What needs to be configured is the path to the controller tags that will be displayed on the PanelView Plus 600.

1. Expand the RSLinx Enterprise icon in the tree and double-click on the Communications Setup.

This will display the communications setup window.

3/27/2013

NOT-SP003E-EN-E

Page 38 of 98

2. Verify that the communication shortcut EIP has already been created.

3. Click on the Local and Target tabs and verify that the communication path is directed to the

1756-L63 in slot 3 as shown above. 4. Select OK to close the Communications Setup window.

Creating and Downloading a Runtime Application Now that the configuration is complete, the runtime application must be created. 1. From the toolbar menu, select Application > Create Runtime Application. 2. Type the filename ?EIP_DM.mer? and select Save.

Please be patient as the runtime image is created.

3. To download this image, select Tools > Transfer Utility from the toolbar menu. 4. Use the Browse key to select the file you just created.

3/27/2013

NOT-SP003E-EN-E

Page 39 of 98

5. Select the PanelView Plus 600 (IP Address 192.168.1.5) for the Destination Terminal and

select Download. 6. If asked if you want to overwrite the existing file, select Yes.

7. Once the download completes, select OK and exit the transfer utility.

The application has been downloaded to the PanelView Plus 600.

8. Go to your PanelView Plus 600 screen. The RSView Station window should be displayed. 9. Load the image that was downloaded by selecting Load Application. 10. Choose the file that was downloaded (EIP_Demo.mer) and select Load.

11. Select Yes to replace the current configuration. It will take a few moments to load. 12. Once loaded, select Run Application.

3/27/2013

NOT-SP003E-EN-E

Page 40 of 98