netbackup - 5220安装配置维护 - 图文

7.6根据需要设置admin密码。

点击NEXT。

7.7设置主机角色，这里选择master server。如果是设置media

server主机，那么选择media server选项，并根据设计选择相应的角色。

正在配置，配置时间大概15分钟。

2. 配置media

这是配置扩展柜的，如果不需要扩展柜可以跳过这一步。5220默认已经有接近4.5T可用空间，一般是930T的硬盘，六块RAID6，两块RAID1.

2.1. 配置FT media server

backup-server.Settings> FibreTransport SANClient Enable

出现问题安装补丁包：

上传软件包：找到share菜单,share open backup-server.Software> Share open

The CIFS share \\\\backup-server\\incoming patches

and the NFS share backup-server:/inst/patch/incoming have been opened on this appliance.

网站：

http://www.symantec.com/business/support/index?page=content&id=TECH183663&actp=search&viewlocale=en_US&searchid=1363230060506

如下插槽的光纤卡表示其他SAN client可发现光纤口 backup-server.FC> show

FC HBA card(s) are configured correctly. **** FC HBA Cards ****

05:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

05:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

06:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

06:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

0a:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

0a:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

**** Drivers ****

qla2xxx is loaded windrvr6 is loaded

**** Ports ****

Bus ID Slot Port WWN Status Mode Speed Remote Ports

05:00.0 Slot3 21:00:00:24:FF:47:1A:44 Linkdown Initiator 8 gbit/s 05:00.1 Slot3 21:00:00:24:FF:47:1A:45 Linkdown Initiator 8 gbit/s 06:00.0 Slot4 21:00:00:24:FF:47:26:3C Disconnected Target 8 gbit/s 06:00.1 Slot4 21:00:00:24:FF:47:26:3D Linkdown Initiator 8 gbit/s 0a:00.0 Slot2 21:00:00:24:FF:48:D4:9E Fabric Target 4 gbit/s 0a:00.1 Slot2 21:00:00:24:FF:48:D4:9F Linkdown Initiator 8 gbit/s

*** Devices ****

Device Vendor Host Type Remote Port *** VLAN ****

Please scan for VLAN hosts first *** Notes ****

(NOTE: Ports in mode \ Server is active, however, are currently running in initiator mode, i.e. SAN Client is disabled or inactive.) backup-server.FC>

如下进程代表FT media server 服务开启 backup-server.Processes> NetBackup Show Start Stop

backup-server.Processes> NetBackup Show NB Processes ------------

root 8745 1 0 16:10 ? 00:00:03 /usr/openv/netbackup/bin/nbftsrvr

root 9852 1 0 16:10 ? 00:00:00 /usr/openv/netbackup/bin/vnetd -standalone

root 9855 1 0 16:10 ? 00:00:00 /usr/openv/netbackup/bin/bpcd -standalone root 9928 1 0 16:10 ? 00:00:03 /usr/openv/db//bin/NB_dbsrv @/usr/openv/var/global/server.conf @/usr/openv/var/globa l/databases.conf -hn 7

root 9987 1 0 16:10 ? 00:00:00 /usr/openv/netbackup/bin/nbevtmgr root 9993 1 0 16:10 ? 00:00:00 /usr/openv/netbackup/bin/nbaudit root 10168 1 0 16:10 ? 00:00:00 /usr/openv/pdde/pdcr/bin/spad -q

pddb 10358 1 0 16:10 ? 00:00:00 /usr/openv/pdde/pddb/bin/postmaster -D /disk/databases/pddb/data -N 512 -B 1024 -i - p10085

root 10493 1 0 16:10 ? 00:00:02 /usr/openv/netbackup/bin/nbemm root 10501 1 0 16:10 ? 00:00:01 /usr/openv/pdde/pdcr/bin/spoold -q