User Manual S352

S352

1. Safety information

Note: Please read this information before you use the headset. Electronics Devices

To avoid electromagnetic interference, please turn off the headset in any place where posted notices instruct you to do so.

Note: Most modern electronic devices are susceptible to electromagnetic

interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Aircraft

Turn off the headset when on board an aircraft. The use of this headset might interfere with the electrical system of an aircraft. Medical Instruments

If you use a medical device, such as a pacemaker, consult the manufacturer of your medical device to determine if it is adequately shielded from

electromagnetic interference. Your physician can assist you in obtaining this information. Power Adapter

Only use the supplied power adapter with the headset. Placement

You are advised to put the headset in a safe place where it will not be bent or crushed when not in use otherwise it may bring harm to human body. Children

Keep the headset away from children. Some small or detachable parts might be swallowed and result in harm. Repair or Service

Any attempt to modify or remove of any part of the headset will void the warranty.

2 General Description

S352 is wireless stereo headset, using Bluetooth wireless communication.

H710 adheres to the Bluetooth V2.0 specifications and supports the Headset, Hands-free,A2DP and AVRCP Bluetooth profiles.

3.Getting started

3.1 Identifying parts

1

1. Volume Button 2. Three-way button 3. Mic

4.Multi-Function Button 5. LED indicator 6.folded ear hook 7. Charging interface

3.2 Three-way Button

There are three ways of operation of three-way button as follows:

2

: On voice mode mute/ resume button; on music mode

Three-way button

pause/ play button.. Three-way button Three-way button

: On music mode, next song button : music mode, previous song button

3.3 Things in package

3.4 Headset, LED Indicator

Headset Status Power On Power off Pair

Standby (acoustic connection)

Working(acoustic connection)

Description

Blue indicator flash 5 times Red indicator flash 5 times Blue indicator and red indicator flash alternately Blue indicator flash once every two seconds, red indicator off

Blue indicator flash once per second, red indicator off

3

low voltage (standby mode)

low voltage (working mode) charging

Red indicator flash once every two sec.,blue indicator off

Red indicator flash once per sec., blue indicator off

Red indicator on

3.5 Headset built-in battery

There is a battery in the headset. Please charge the Bluetooth headset before using. It takes about two and a half hour to charge. You could charge it with charger adaptor or USB cable with connecting to the computer.

Note:

(1) Please make sure the max. output voltage (including noise) of Adapter is ≤6V (including empty load and full load), otherwise the damage is not responsible. (2)The red indicator is on when charging, and it will be off after finishing charging.

3.6 Operation Range

The operation range of Bluetooth devices is 10m.

4. S352 function and operation

If there is no special instruction, the ‘short press’ means pressing less than 1 second; the ‘long press’ means pressing more than 3 seconds; the ‘ultra long press’ means more than 5 seconds.

4.1 Phone operation—pair Bluetooth headset and mobile phone

Before using S352, please pair S352 with mobile phone or other Bluetooth devices. You can use S352 only after pair. Pair means establishing a connection between Bluetooth devices,to make Bluetooth devices （ say mobile phone）remember the address of Bluetooth stereo headset.

(1) Make headset to pair mode. When the headset is power off, press MFB

more than 5 seconds until the indicators showing as blue and red indicators flash alternatively, then your headset is in pair mode. (2) Start your mobile bluetooth search function.（Operate as your mobile

instruction）

(3) After search, S352 will show in your Bluetooth device list on your

mobile phone.

(4) Select S352 in the bluetooth device list, you will be asked to input

code. Then please input 0000.If pair successfully, indicator of headset will turn from red and blue alternate to blue indicator flash. Note:

4