各品牌网络设备SNMP及NetFlow配置集

[router-loopback1]ip address 1.1.1.1 255.255.255.255 [router]snmp-agent community read net123 [router]snmp-agent sys-info version all [router]snmp-agent trap enable

[router]snmp-agent trap source loopback 0

[router]snmp-agent target-host trap address 10.243.191.2 parameters v1 port 162 securityname public

[router]info-center enable

[router]info-center loghost 0 10.243.191.2 514 Chinese [router]info-center loghost 1 10.243.191.3 514 Chinese [router]save [router]logout

2、其它型号的： huawei router: sys

[router]snmp-agent community read net123 [router]snmp-agent sys-info version all [router]snmp-agent trap enable

[router]snmp-agent trap source loopback 0

[router]snmp-agent target-host trap address udp-domain *.*.*.* udp-port 162 params securityname net123 [router]quit save

四、3COM设备

1）进入菜单：system/management/snmp/community ENTER new community for user 'admin'[admin] : 回车

ENTER new community for user 'manager' [XXX] : 回车

ENTER new community for user 'monitor' :设置 SNMP community string.

2）进入菜单：system/management/snmp/trap/create enter the trap community string [monitor]: 回车 enter the trap destination address: 192.168.9.157 NS防火墙 系统日志和SNMP: set syslog enable

set syslog config 10.20.1.2 auth/sec local0 set syslog config 172.10.16.25 local0 local0 set syslog port 514 set syslog traffic set syslog vpn

set log module system level notification destination syslog set log module system level notification destination webtrends set snmp community remote_admin read-write trap-on set snmp community JCarney read-only trap-on

set snmp community TCooper read-write trap-on traffic set snmp vpn

set snmp contact John Fisher set snmp location Miami

set snmp host remote_admin 10.20.1.2 set snmp host JCarney 172.16.20.181 set snmp host JCarney 172.16.40.245 set snmp host JCarney 172.16.40.55 set snmp host TCooper 172.16.20.250 save

五、SUMMIT设备 # SNMP Configuration

configure snmp add trapreceiver 169.254.70.255 community \configure snmp add trapreceiver 169.254.70.255 community \configure snmp delete community readonly all configure snmp delete community readwrite all

configure snmp add community readonly V5rypted \configure snmp add community readwrite V5rypted \configure snmp sysName \

六、Solaris系统网管告警配置需求

一、对于snmp需要进行如下配置（包括trap）：

1、修改/etc/snmp/conf/snmpd.conf文件，使相关内容如下

system-group-read-community net123

read-community net123

trap 172.16.63.129

2、root用户重新启动snmpd进程

/etc/rc3.d/S76snmpdx stop|start

二、对于syslog需要进行如下配置：

1、修改/etc/hosts文件，在文件末尾加入：

10.25.25.46 loghost1

2、修改/etc/syslog.conf在文件末尾增加下面一行

*.info @loghost1

注：*.info与@loghost1之间是TAB键

3、root用户重新启动syslog服务

/etc/rc2.d/S74syslog stop|start

华为

[router]interface loopback1

[router-loopback1]ip address 1.1.1.1 255.255.255.255（BSM服务器的IP） [router]snmp-agent community read net123 [router]snmp-agent sys-info version all [router]snmp-agent trap enable

[router]snmp-agent trap source loopback 0

[router]snmp-agent target-host trap address 10.243.191.2 parameters v1 port 162 securityname public [router]save